SmartLine Pinewood Derby® Timer
Limited time only!
We are upgrading the Double Sided placement only displays to the Champ double sided with time on one side displays.
| Lanes | Single Sided Place | Double Sided Place | Single Sided Time/Place | Double Sided Time Double Sided Place (P2T2) |
|---|---|---|---|---|
| 1 | ------- | ------- | $299.00* | ------- |
| 2 | $319.00 | $359.00 | $369.00 | $409.00 |
| 3 | $349.00 | $409.00 | $429.00 | $489.00 |
| 4 | $379.00 | $469.00 | $479.00 | $579.00 |
| 6 | $459.00 | $579.00 | $609.00 | $729.00 |
* 1 lane display shows Time and Place on one side. Placement display shows timer status such as blocked lane and gate position.
Base prices shown above. Prices vary depending on mount type and communication type.
Additional charges for:
| Piantedosi/Microwizard aluminum track mount: | $30 |
|---|---|
| Piantedosi wood track mount: | $30 |
| Custom track mount: | $50 |
| USB version of timer: | $30 |
Included with the SmartLine Pinewood Derby® Timer
- Timer unit with your selected type of display:
- Embedded USB or Serial output version
- All communication features are ENABLED but it can be used without a computer.
- 12V Power Supply
- Start Gate Switch and Reset button Harness Assembly for mounting on the start gate.
- Start Gate Harness to Timer Stereo Cable with break-away design.
- Communication Cables:
- One of the following cables depending on the timer ouput:
- Serial output Version:
- 50' detachable Serial cable included with each Serial timer.
- Purchase a USB to Serial Converter for connection to a USB PORT on your computer.
- USB output Version:
- 10' USB cable included with each USB timer.
- Purchase a USB ACTIVE EXTENSION cable for more flexibility on computer placement.
Track Mounting Methods
It is IMPORTANT to get the correct mounting method for your track.
Specify which type of mount you need when ordering.
If you have a custom track, send us an email including the measurements of your track and the name of the purchaser.
Contact us if you are unsure about your track.
Measurement Example for wooden tracks -
Measurement from start looking toward finish.
It is important to work with the timer ahead of time so you are familiar it.
This is especially true if you are using a race management program.
Please send us your Race Date in an email if it is approaching.
Mounting options: We can mount to almost any track.
- BestTrack® track.
Click to see the BestTrack® Installation image. - Custom type tracks.
A custom track needs to holes in the track for the sensors and if it doesn't you need to drill 1/4" holes. We determine how the sensors should be mounted under your track depending on the style of track you have.
There are a couple different methods of mounting your timer and sensors to the track for best performance.
The first option for mounting is to have the sensors above the mounting bar. The second option for mounting is to have the sensors under the mounting bar. Send us a picture of the profile of your track so we can determine which mount is best for you. - Piantedosi/Microwizard Freedom aluminum track.
- Piantedosi Classic wooden track.
Double Sided Displays
Our double sided displays allow you to view the race results from 360 degrees. The displays are mounted directly onto the standard Plexiglas panel. The bright 2 1/4" displays are mounted into the same attractive boxes with red glass on both sides. These hand-crafted boxes are just slightly thicker than the single sided display boxes.
More InfoTime and Place Displays
Our time/place displays show the finish time and placement value at the same time as each car finishes. The time is shown on the front side of the displays only.
More InfoSmartLine Complete Space Derby® Timer
| Single Sided Place | Double Sided Place | Single Sided Time/Place | Double Sided Time Double Sided Place (P2T2) |
|---|---|---|---|
| $379.00 | $469.00 | $479.00 | $579.00 |
Base prices shown above. Prices vary depending on communication type.
Additional charges for:
| USB version of timer: | $30 |
|---|
Included with the SmartLine Space Derby® Timer - 4 lanes only
- 4 lane Timer unit:
- Choice of display as for the Pinewood Derby® Timer
- all communication features are ENABLED
- 4 Space Derby® sensors
- 12V Power Adaptor
- Spacer tubes for use on line
- Reset/Start gate switch clamp
- Self-stick velcro straps for securing parts
- Electrical tape for securing sensors and wires on line
- Start gate cable and Harness assembly
- Communication Cables:
- One of the following cables depending on the timer ouput:
- Serial output Version:
- 50' detachable Serial cable included with each Serial timer.
- Purchase a USB to Serial Converter for connection to a USB PORT on your computer.
- USB output Version:
- 10' USB cable included with each USB timer.
- Purchase a USB ACTIVE EXTENSION cable for more flexibility on computer placement.
Double Sided Displays
Our double sided displays allow you to view the race results from 360 degrees.
The bright 2 1/4" Placement displays are highly visable with red glass panels enhancing the numbers.
Time and Place Displays
Our time/place displays show the finish time and placement value at the same time as each car finishes. The time is shown on the BOTH sides of the displays. You have asked and we delivered. We also added an extra decimal and made it 4 decimals so you can see the higher precision.
SmartLine Storage Cases for your Timer
| X-Tall Small Case for SmartLine II and Champ Timer (4 lane or less) |
X-Tall Large Case for SmartLine II and Champ Timer (6 lane or less) |
|---|---|
| $179.00 | $199.00 |
Case Dimensions
| X-Tall Small Specs | X-Tall Large Specs | |
|---|---|---|
| Interior Dims | 21.3" x 14.3" x 6.2" SmartLine II or BestTrack® Champ 4 lane or less |
25.8" x 14.3" x 6.62" SmartLine II or BestTrack® Champ 6 lane |
| Exterior Dims | 23" x 16" x 7" | 27.5" x 16" x 7" |
Notice
Please make sure your timer fits in the case you purchase.
The X-TALL cases are designed for the SmartLine Timer II and the BestTrack® Champ timer.
- Maximum track width if you have a custom track:
- Small case 18"
- Large case 22.5"
Contact us if you have a SmartLine I (Original design).
No case is available for a BestTrack® Champ 8 lane timer.
Additional Items
| Description | Price | |
|---|---|---|
| GrandPrix Race Manager | GrandPrix Pro version currently unavailable-purchase directly from GrandPrix | $75 |
| Space Retrofit Sensors | Add on to SmartLine or Champ Pinewood timer for Space race. | $129 |
| Pinewood Retrofit Sensors | Add on to SmartLine Complete Space timer for Pinewood race. | Currently not available |
| Photo Finish 7.0 | Photo Finish 7 capture device and software verified to work with Windows 7. | Currently not available |
Replacement Items
| Description | Price | |
|---|---|---|
| Start Gate Harness Assembly without cable | Start Gate Harness Assembly (reset button and start switch) | $40 |
| Start Gate Harness Assembly with cable | Start Gate Harness Assembly (reset button, start switch and break-away cable) | $59 |
| Replacement Sensor Sets | Complete set of Pinewood Derby® sensors for SmartLine II or Champ by BestTrack®. Sold in sets only. | $10/lane |
| Replacement Power Adapter | Power adapter is a 12V 1Amp center positive. | $35 |
Replacement Cables
| Description | Price | |
|---|---|---|
| USB to Serial Converter for use with SERIAL TIMER | Sabrent FTDI USB 2.0 to Serial (9-Pin) DB-9 RS-232 Adapter with 6ft Cable. Use with Serial output timer to convert the Serial output from timer to USB 2.0 input to a computer. This is for use on current Windows 7 and newer computers. | $35 |
| 50' Serial Cable for use with SERIAL TIMER | Use with Serial output timer. Computer to timer communication cable. | $22 |
| 25' Serial Cable for use with SERIAL TIMER | Use with Serial output timer. Computer to timer communication cable. | Currently not available |
| 10' USB A-B Cable for use with USB TIMER | Use with USB output timer. Computer to timer communication cable. | $15 |
| USB Active Extension for use with USB TIMER | Use with USB output timer. 32' USB Extension allows for computer to be located near center of track | $28 |
| Start Gate Cable | Stereo Jack Cable that connects Start Gate Harness (reset button/start switch) to timer. | $19 |
© 2004-2022 eTekGadget · All rights reserved ·